Some magazines get a bunch of responses from visitor surveys. One frequent comment from PCB designers as well as circuit board engineers involves the setback of working with each other. Likewise, a question ,often asked, is, “Are EEs taking charge of PC board design?”
PCB design in the 1970s was less a matter of engineering and also even more a matter of fine art. Obviously science was referred,but that science was far more regarding mechanics as well as manufacturability of bare pcb and assemblies compared to concerning electronics. Individuals ,who knew the worth of copper balance, pad-to-hole proportion, hole-to-board density ratio, exactly how part positioning influenced setting up and repair service, understanding of thermal transfer, etc. made better board developers than those with knowledge of just circuit concept. Those that had good analytical capability really had the best device required for PCB design. Yet who paid the attention to the knowledge of electronics?
Why did EE knowledge play such a little function back then? Circuits in those days, with the exception of the RF world, were so reduced in regularity that board traces had to be several yards long before they were a distributed length, qualified of affecting performance. You could, by today’s criteria, make every error under the sun, also in extremely big PCB manufacturing boards, and also there was a good possibility the circuit would work anyhow. This is not true at all the time, but for most of time, it is true.
From the 1950s to the late 1980s, the PCB design methods were seriously bending the laws of physics, stammering on the edge of catastrophe! Most of those PC board developers were changed into technicians, mechanical developers, and musicians who discovered how to review a schematic and also konw artwork taping. EEs would certainly frequently provide their ideas on what need to be done, but you could possibly pay attention to them or overlook them and also the wire would likely work anyway. This age developed some stress in between board designers and their EE counterparts, primarily since they completely overlooked each other’s ideas.So in order to make better pcb or prototype pcb,it is better for board designers and EE counterparts to pay attention to each other’s thoughts.